PLBW Beta
pewag winner profilift lifting point PLBW Beta.
Five-fold safety.
This is another lifting point that is 360° rotatable. The load ring is movable to an angle of 180° and can be positioned at any required angle due to its replaceable and patented spring. In the permitted applications, this lifting point offers five-fold safety.
Due to the pewag quality standard, each lifting point comes with an individual serial number. The lifting points are marked with the admissible load capacity for the most unfavourable application mode, allowing for an increased load capacity in case of vertical loads.
The hexagonal special screw made from grade 10.9 material is also interchangeable and secured against loss. The screw is 100% crack-tested as well as covered with a chromate VI-free protection against corrosion and marked with the load capacity and thread size. It can be tightened with a hexagon wrench or spanner wrench.
pewag winner profilift beta is available with metric or UNC-thread. The versions with metric thread are also available with customised thread lengths.
All load capacities, categorised by method of lifting, number of legs and angle of inclination are contained in a table that forms an integral part of the operating manual included with each lifting point.
Also available with peTAG upon request.
Описание продукта
Permitted usage
For load capacities in the permitted directions of pull please refer to the load capacity table.
Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:
- Direction of pull is obstructed.
- Direction of pull is not within the indicated area.
- Loading ring rests against edges or loads.
The loading ring must be placed in the direction of pull before loading – do not turn under load! For additional details and information, please refer to the full operating manual.
Calculating the required thread length (L):
L = H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.
In addition to the standard and maximum thread lengths, pewag also offers cut-to-length thread lengths. Customised and maximum thread lengths are supplied with a washer and a screw nut.
For detailed information such as method of lifting, number of legs, angle of inclination etc., please refer to the tables with technical data.
3D-зображення
Видео
Таблиця характеристик
| PLBW Beta | Code / Type | thread [mm] |
load capacity [kg] |
a [mm] |
b [mm] |
c [mm] |
e [mm] |
f [mm] |
g [mm] |
h [mm] |
n [mm] |
n max [mm] |
 [mm] |
 [mm] |
weight [kg/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
PLBW 0,3 t | M8 | 300 | 29 | 56 | 30 | 38 | 18 | 27 | 94 | 13 | 80 | 8 | 15 | 0.31 | PLBW 0,6 t | M10 | 600 | 29 | 56 | 30 | 38 | 18 | 27 | 94 | 15 | 100 | 8 | 15 | 0.35 | PLBW 1 t | M12 | 1,000 | 29 | 56 | 30 | 38 | 18 | 27 | 94 | 17 | 180 | 8 | 15 | 0.37 | PLBW 1,3 t | M14 | 1,300 | 43 | 79 | 45 | 55 | 25 | 38 | 138 | 22 | 220 | 10 | 24 | 1.03 | PLBW 1,6 t | M16 | 1,600 | 43 | 79 | 45 | 55 | 25 | 38 | 138 | 24 | 260 | 10 | 24 | 1.04 | PLBW 2 t | M18 | 2,000 | 43 | 79 | 45 | 55 | 25 | 38 | 138 | 27 | 295 | 10 | 24 | 1.07 | PLBW 2,5 t | M20 | 2,500 | 43 | 79 | 45 | 55 | 25 | 38 | 138 | 30 | 335 | 10 | 24 | 1.08 | PLBW 3 t | M22 | 3,000 | 64 | 118 | 68 | 85 | 38 | 58 | 209 | 33 | 355 | 14 | 36 | 3.50 | PLBW 4 t | M24 | 4,000 | 64 | 118 | 68 | 85 | 38 | 58 | 209 | 36 | 355 | 14 | 36 | 3.60 | PLBW 5 t | M27 | 5,000 | 64 | 118 | 68 | 85 | 38 | 58 | 209 | 40 | 355 | 14 | 36 | 3.60 | PLBW 6,3 t | M30 | 6,300 | 64 | 118 | 68 | 85 | 38 | 58 | 209 | 45 | 355 | 14 | 36 | 3.70 | PLBW 8 t | M33 | 8,000 | 106 | 188 | 108 | 132 | 60 | 91 | 331 | 54 | 328 | 19 | 55 | 14.30 | PLBW 10 t | M36 | 10,000 | 106 | 188 | 108 | 132 | 60 | 91 | 331 | 59 | 328 | 19 | 55 | 14.40 | PLBW 12,5 t | M42 | 12,500 | 106 | 188 | 108 | 132 | 60 | 91 | 331 | 69 | 328 | 19 | 55 | 14.70 | PLBW 15 t | M48 | 15,000 | 106 | 188 | 108 | 132 | 60 | 91 | 331 | 74 | 328 | 19 | 55 | 15.00 |
| PLBW Beta | Code / Type | thread [inch] |
load capacity [lbs] |
a [inch] |
b [inch] |
c [inch] |
e [inch] |
f [inch] |
g [inch] |
h [inch] |
n [inch] |
n max [inch] |
[inch] |
[inch] |
weight [lbs/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLBW U 5/16 | 5/16"-18 | 660 | 1.14 | 2.20 | 1.18 | 1.50 | 0.71 | 1.06 | 3.70 | 0.51 | - | 5/16" | 5/8" | 0.71 | PLBW U 3/8 | 3/8"-16 | 1,300 | 1.14 | 2.20 | 1.18 | 1.50 | 0.71 | 1.06 | 3.70 | 0.59 | - | 5/16" | 5/8" | 0.73 | PLBW U 7/16 | 7/16"-14 | 2,200 | 1.14 | 2.20 | 1.18 | 1.50 | 0.71 | 1.06 | 3.70 | 0.67 | - | 5/16" | 5/8" | 0.75 | PLBW U 1/2 | 1/2"-13 | 2,200 | 1.14 | 2.20 | 1.18 | 1.50 | 0.71 | 1.06 | 3.70 | 0.67 | - | 5/16" | 5/8" | 0.77 | PLBW U 9/16 | 9/16"-12 | 3,000 | 1.69 | 3.11 | 1.77 | 2.17 | 0.98 | 1.50 | 5.43 | 0.87 | - | 3/8" | 1" | 2.27 | PLBW U 5/8 | 5/8"-11 | 3,500 | 1.69 | 3.11 | 1.77 | 2.17 | 0.98 | 1.50 | 5.43 | 0.94 | - | 5/16" | 1" | 2.29 | PLBW U 3/4 1) | 3/4"-10 | 5,500 | 1.69 | 3.11 | 1.77 | 2.17 | 0.98 | 1.50 | 5.43 | 1.18 | - | 5/16" | 1" | 2.38 | PLBW U 7/8 1) | 7/8"-9 | 8,800 | 2.52 | 4.65 | 2.68 | 3.35 | 1.50 | 2.28 | 8.23 | 1.42 | - | 9/16" | 1 3/8" | 7.78 | PLBW U 1 1) | 1"-8 | 11,000 | 2.52 | 4.65 | 2.68 | 3.35 | 1.50 | 2.28 | 8.23 | 1.57 | - | 9/16" | 1 3/8" | 7.89 | PLBW U 1 1/8 1) | 1 1/8"-7 | 13,500 | 2.52 | 4.65 | 2.68 | 3.35 | 1.50 | 2.28 | 8.23 | 1.77 | - | 9/16" | 1 3/8" | 8.07 | PLBW U 1 1/4 1) | 1 1/4"-7 | 17,500 | 4.17 | 7.40 | 4.25 | 5.20 | 2.36 | 3.58 | 13.03 | 2.13 | - | 3/4" | 2 3/16" | 32.00 | PLBW U 1 3/8 1) | 1 3/8"-6 | 22,000 | 4.17 | 7.40 | 4.25 | 5.20 | 2.36 | 3.58 | 13.03 | 2.32 | - | 3/4" | 2 3/16" | 32.20 | PLBW U 1 1/2 1) | 1 1/2"-6 | 24,000 | 4.17 | 7.40 | 4.25 | 5.20 | 2.36 | 3.58 | 13.03 | 2.72 | - | 3/4" | 2 3/16" | 32.80 |
| Method of lifting |  |
 |
 |
 |
 |
|
 |
|
 |
 |
|||
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | 3+4 | |||
| Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | asymm° | |||
| PLBW Beta | Code / Type | thread [mm] |
fastening torque [Nm] |
load capacity [kg] |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLBW 0,3 t | M8 | 6 | 500 | 300 | 1,000 | 600 | 400 | 300 | 600 | 450 | 300 | 300 | PLBW 0,6 t | M10 | 10 | 1,000 | 600 | 2,000 | 1,200 | 800 | 600 | 1,300 | 900 | 600 | 600 | PLBW 1 t | M12 | 15 | 1,300 | 1,000 | 2,600 | 2,000 | 1,400 | 1,000 | 2,100 | 1,500 | 1,000 | 1,000 | PLBW 1,3 t | M14 | 30 | 2,000 | 1,300 | 4,000 | 2,600 | 1,800 | 1,300 | 2,700 | 1,900 | 1,300 | 1,300 | PLBW 1,6 t | M16 | 50 | 2,500 | 1,600 | 5,000 | 3,200 | 2,200 | 1,600 | 3,400 | 2,400 | 1,600 | 1,600 | PLBW 2 t | M18 | 70 | 3,000 | 2,000 | 6,000 | 4,000 | 2,800 | 2,000 | 4,200 | 3,000 | 2,000 | 2,000 | PLBW 2,5 t | M20 | 100 | 3,500 | 2,500 | 7,000 | 5,000 | 3,500 | 2,500 | 5,300 | 3,700 | 2,500 | 2,500 | PLBW 3 t | M22 | 120 | 4,500 | 3,000 | 9,000 | 6,000 | 4,200 | 3,000 | 6,300 | 4,500 | 3,000 | 3,000 | PLBW 4 t | M24 | 160 | 5,500 | 4,000 | 11,000 | 8,000 | 5,600 | 4,000 | 8,400 | 6,000 | 4,000 | 4,000 | PLBW 5 t | M27 | 200 | 6,500 | 5,000 | 13,000 | 10,000 | 7,000 | 5,000 | 10,500 | 7,500 | 5,000 | 5,000 | PLBW 6,3 t | M30 | 250 | 7,000 | 6,300 | 14,000 | 12,600 | 8,800 | 6,300 | 13,200 | 9,400 | 6,300 | 6,300 | PLBW 8 t | M33 | 270 | 9,000 | 8,000 | 18,000 | 16,000 | 11,000 | 8,000 | 16,500 | 12,000 | 8,000 | 8,000 | PLBW 10 t | M36 | 320 | 11,000 | 10,000 | 22,000 | 20,000 | 14,000 | 10,000 | 21,000 | 15,000 | 10,000 | 10,000 | PLBW 12,5 t | M42 | 400 | 13,500 | 12,500 | 27,000 | 25,000 | 17,500 | 12,500 | 26,300 | 18,700 | 12,500 | 12,500 | PLBW 15 t | M48 | 600 | 16,000 | 15,000 | 32,000 | 30,000 | 21,000 | 15,000 | 32,000 | 22,500 | 15,000 | 15,000 |
| Method of lifting | |
|
|
|
|
|
|
|
|
|
|||
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | 3+4 | |||
| Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | asymm° | |||
| PLBW Beta | Code / Type | thread [inch] |
fastening torque [ft-lbs] |
load capacity [lbs] |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLBW U 5/16 | 5/16"-18 | 4.50 | 1,100 | 660 | 2,200 | 1,320 | 900 | 660 | 1,400 | 900 | 660 | 660 | PLBW U 3/8 | 3/8"-16 | 7.50 | 2,200 | 1,300 | 4,400 | 2,600 | 1,800 | 1,300 | 2,700 | 1,900 | 1,300 | 1,300 | PLBW U 7/16 | 7/16"-14 | 11 | 2,800 | 2,200 | 5,600 | 4,400 | 3,000 | 2,200 | 4,600 | 3,300 | 2,200 | 2,200 | PLBW U 1/2 | 1/2"-13 | 11 | 2,800 | 2,200 | 5,600 | 4,400 | 3,000 | 2,200 | 4,600 | 3,300 | 2,200 | 2,200 | PLBW U 9/16 | 9/16"-12 | 22 | 4,400 | 3,000 | 8,800 | 6,000 | 4,200 | 3,000 | 6,300 | 4,500 | 3,000 | 3,000 | PLBW U 5/8 | 5/8"-11 | 37 | 5,500 | 3,500 | 11,000 | 7,000 | 4,900 | 3,500 | 7,300 | 5,200 | 3,500 | 3,500 | PLBW U 3/4 1) | 3/4"-10 | 74 | 6,600 | 5,500 | 13,200 | 11,000 | 7,700 | 5,500 | 11,500 | 8,200 | 5,500 | 5,500 | PLBW U 7/8 1) | 7/8"-9 | 118 | 12,000 | 8,800 | 24,000 | 17,600 | 12,300 | 8,800 | 18,500 | 13,200 | 8,800 | 8,800 | PLBW U 1 1) | 1"-8 | 148 | 13,000 | 11,000 | 26,000 | 22,000 | 15,400 | 11,000 | 23,000 | 16,500 | 11,000 | 11,000 | PLBW U 1 1/8 1) | 1 1/8"-7 | 185 | 14,300 | 13,500 | 28,600 | 27,000 | 18,900 | 13,500 | 28,300 | 20,200 | 13,500 | 13,500 | PLBW U 1 1/4 1) | 1 1/4"-7 | 200 | 19,800 | 17,500 | 39,600 | 35,000 | 24,500 | 17,500 | 36,700 | 26,200 | 17,500 | 17,500 | PLBW U 1 3/8 1) | 1 3/8"-6 | 236 | 24,000 | 22,000 | 48,000 | 44,000 | 30,800 | 22,000 | 46,200 | 33,000 | 22,000 | 22,000 | PLBW U 1 1/2 1) | 1 1/2"-6 | 295 | 25,000 | 24,000 | 50,000 | 48,000 | 33,600 | 24,000 | 50,400 | 36,000 | 24,000 | 24,000 |
| 1) Safety factor 4 | |||||||||||||
| Safety factor 5 Important: Subject to technical changes! |
|||||||||||||
Загрузки
PLBW 0,3 t |
|
|
|
PLBW 0,6 t |
|
|
|
PLBW 1 t |
|
|
|
PLBW 1,3 t |
|
|
|
PLBW 1,6 t |
|
|
|
PLBW 10 t |
|
|
|
PLBW 12,5 t |
|
|
|
PLBW 15 t |
|
|
|
PLBW 2 t |
|
|
|
PLBW 2,5 t |
|
|
|
PLBW 3 t |
|
|
|
PLBW 4 t |
|
|
|
PLBW 5 t |
|
|
|
PLBW 6,3 t |
|
|
|
PLBW 8 t |
|
|
|
PLBW U 1 |
|
|
|
PLBW U 1 1/2 |
|
|
|
PLBW U 1 1/4 |
|
|
|
PLBW U 1 1/8 |
|
|
|
PLBW U 1 3/8 |
|
|
|
PLBW U 1/2 |
|
|
|
PLBW U 3/4 |
|
|
|
PLBW U 3/8 |
|
|
|
PLBW U 5/16 |
|
|
|
PLBW U 5/8 |
|
|
|
PLBW U 7/16 |
|
|
|
PLBW U 7/8 |
|
|
|
PLBW U 9/16 |
|
|
|